Protect Your Students With Two-Way Radios For Bus Drivers

Two Way Radios for School Bus Drivers NJIf you thought that the days of the two-way radios were over and gone you’re not alone. It turns out, there are some situations when a cell phone just isn’t a good option. One example of this is school bus drivers; they have a much better time keeping their students safe if the bus has a two-way radio in it.

Never Take Your Eyes Off the Road

The biggest danger of using a cell phone instead of a two-way radio on a school bus is that it’s very difficult to use the cell phone without taking your eyes off the road. This is twice as true if your using a Smartphone that has a touch screen instead of buttons.  Every second the driver has his/her eyes on the phone instead of the road, the likelihood of getting into a serious accident increases. Two-way bus radios have been designed to be used so that the driver can handle the bus with one hand, and work the radio mouthpiece with the other.

Two-Way Radios are Less Distracting than Cell Phones

It doesn’t take much for even the most conscientious bus driver to be distracted by his/her cell phone. Every time the phone chirps, the temptation to quickly glance at the screen can be too much for some drivers to resist. Even if the driver doesn’t touch the phone, worrying about why a family member called and what kind of message was left can distract the driver, increasing the odds of them making a mistake that could put the lives of the students they’re transporting at risk.

Having a two-way radio integrator in New Jersey put a system on each bus makes it possible for the bus garage superintendent to insist that the drivers leave their distracting cell phones at home, so they can focus on student safety.

Since the two-way radios are attached firmly to the bus, and the mouthpieces hooks into the radio via a cord, there’s no chance of them dropping and potentially getting caught in the buses pedals like cell phones sometimes do.

Two-Way Radios Work Everywhere

No matter how good a cell phone provider the drivers have, there are going to be places on the bus route where they simply don’t get a signal and calls get dropped. Not being able to communicate with other drivers and the bus garage can create a very dangerous situation. Losing communication will never be a problem when the buses have been equipped with radios. As long as the radio hasn’t been damaged in a severe accident, everyone will be able to communicate. Since the radio signal is clear, the entire message will be easily understood.

Students Can Use the Radio

If there is an emergency and something happens to the bus driver, students will be able to use the radio to contact the bus garage and alert them to the situation. The student that has the presence of mind to use the radio, will also be the student that can be counted on to give an accurate account of the situation.

Acquiring a Radio for the Bus

PMC Associates is the best resource for two-way radio integrator in New Jersey. Not only do they have the best equipment, they also have the best advice about how to use and maintain the two-way radio system. In addition to being a great two-way radio integrator in New Jersey, they also work with bus garages all over the United States. Contact PMC Associates to learn how student safety on the buses can be improved.


Get a closer look at two way radios for Education today with this video slideshow, or call 877-PMC-1988 for a free consultation!

Posted in Two Way Radio Buying Guides, Two Way Radio Products, Two Way Radios for Education

How Vertex Digital Radios Were Used in the Presidential Inauguration

2013 Presidential InaugurationThe 57th Presidential Inauguration was held on January 21st, 2013, and nearly one million people were in attendance. While President Barack Obama was sworn into office, over 200 trained American Red Cross volunteers helped authorities, ensuring the safety and well being of the crowd.

Thus, 20 American Red Cross Disaster Relief “Go Teams” were present in the National Mall area. These teams include people trained in First Aid and CPR, and they take up strategic positions among attendees at any large events. Their role is to help anyone who might fall ill, incur an injury, or ends up separated from their group.

The Key to Success Is Good Communication

Such a large crowd is a nightmare to manage at the best of times, but without a good communication system, it’s practically impossible. When someone needs help, the Go Teams have to first get in touch with the First Responder teams. Then, they provide assistance and have to make sure the person in question reaches a mobile First Aid station.

All this means they need to be able to communicate effectively, which requires a reliable and top-quality radio system. For over two decades, the American Red Cross has been using Vertex radios and repeaters. The teams use the radios to talk to each other, while the repeaters enable coordination with the Command truck.

Gary Gilham, American Red Cross’s Coordinator of Operations and Planning, Emergency & International Services, has always been pleased with how the Vertex Standard analog radios worked, but he was considering moving to digital. Digital is a better option because it offers better encryption, and therefore security, as well as the digital protocol that enables the Red Cross to double the number of radios they could use on the same frequency.

Unfortunately, he hadn’t been all that impressed with the quality of digital radios, until Vertex introduced the eVerge™. Using eVerge radios for the Inauguration proved to be an outstanding decision. Not only were all communications highly secure, which was of paramount importance, the quality of the audio was excellent throughout the entire transmission radius.

Being Short on Time Wasn’t an Issue

The American Red Cross received the radios a mere two weeks before the event, which could have been a disaster, considering the volume of other preparations the teams had to handle. However, the new digital radios proved to be extremely easy to program and operate, so the teams didn’t have to spend days or weeks figuring out how they worked.

Unfortunately, there weren’t enough digital radios for everyone, since Mr. Gilham was testing the new Vertex units, which means some of the teams were assigned analog radios. However, that wasn’t a problem, because the eVerge radios have dual-mode capability; they can communicate with analog and digital units. This is especially interesting to Mr. Gilham, who plans to introduce digital radios, step-by-step.

Another aspect of the eVerge radios the Go Teams greatly appreciate is how light and small they are. The staff were able to clip the radios to their vests, and they didn’t have to carry around a large unit that could become tiresome.

Migrating to Vertex Digital

The American Red Cross is determined to replace their entire fleet of analog radios with Vertex digital units. Though it might take some time, the change will only bring benefits. Thus, the audio quality will always be excellent, and the same frequency can be used for twice as many radios.

Vertex radios are clearly the best solution for major events. If you have an event coming up, or want to migrate to a better system, the go-to Vertex dealer in New Jersey is PMC Radio.


Posted in Two Way Radio Buying Guides, Two Way Radios for Public Safety, Vertex Standard Company Info

Why Two-Way Radio Systems Are The Perfect Gift For Your Public Safety Staff

Public Safety Two Way Radios NJThe two-way radio is an item of equipment that Public Safety staff rely on every day of their working lives. More than any piece of technology, two-way radios form the heart of on-the-ground communications. In critical situations, they’re more than just a means of communication – they can be the difference between life and death, when difficult calls have to be made.

With the new technology features available, your personnel can track one another and provide the necessary backup in a way that older two-way radios haven’t been able to in the past. Potentially dangerous situations call for a constant upgrade in functionality – keeping abreast of new technical developments - if only to provide peace of mind for you and your staff.

As a supervisor or manager of your public safety staff, you’ll want to make sure that you’ve done everything in your power to safeguard the lives of your department. A decision to upgrade your two-way radio equipment now can translate into lives being saved, loved ones being shielded from tragedy and families having an added measure of security in a profession where there are no guarantees.

That’s why you shouldn’t compromise when it comes to quality. You can help ensure your staff’s safety. To provide peace of mind that you’ve done everything in your power to keep families of your public safety intact, make a tangible decision today. Visit PMC Associates, the established Vertex dealer in New Jersey, to arrange a demonstration of the new ranges of two-way radios available.

This company is differentiated from others by its commitment to providing cutting-edge technology at the most affordable prices possible. They also have a state-of-the-art lab for testing the effectiveness of new solutions, and this gives them the ability to understand which solution is best suited to your public safety staff and their specific purposes.

PMC Associates are a Vertex dealer in New Jersey with a difference. They are a family-owned company that understands the meaning of excellence, and the importance of new technology to the improving the safety of public safety workers. With unparalleled competence and commitment to providing rock-solid solutions, they’re also the largest Vertex standard dealership in the country, having forged long-lasting partnerships with the country’s most reliable brands.

In the modern Information Age, new concerns have emerged that could put your public safety staff at risk. Encryption and GPRS, as well as a range of new technologies, are necessary for confronting new challenges. The company is also interested in refining solutions to the old challenges like geo-location, power efficiency, range, robustness and static reduction.

In both two-way radio and two-way mobile radio technology, the Vertex dealer in New Jersey stands head-and-shoulders above the other solutions available. If you have any questions regarding trunking, narrow-banding or going digital, this is the company to call. PMC Associates are an intensely committed company with real people. They have an interest in bettering safety conditions for public safety staff.

If you’d like to visit PMC Associates in person, you can meet them and discuss your communication needs with them at 8 Crown Plaza, Suite 106, Hazlet, NJ 07730. That’s a half hour’s drive from Staten Island or East Brunswick. Travelling along Middle Road from either area, you’ll make a right turn into Union Drive. Continue along Union Drive, past Green Meadows farm and turn into Crown Plaza on your immediate left.


Check out this video slideshow or come visit us today to see the Vertex Standard difference with PMC Radio!

Posted in Hazlet NJ Community Info, NJ Local Service Areas, Two Way Radios for Emergency / First Responders, Two Way Radios for Public Safety, Vertex Standard Company Info

Vertex Digital Radios vs. Analog: What’s The Difference?

Vertex eVerge EVX 530 in New JerseyIf your business is looking to upgrade, replace or start fresh with a digital radio system, one of the first questions a lot of people ask is: Is a new Vertex digital system really worth it? We’ll tell you now, the short answer is “yes” – but if your outfit is normal, you’ll need some reasons for that conclusion, and that’s what your friendly New York Vertex dealer offers you today.

Well acquainted with analog

Old technology, like analog radios, is tried and tested – people are familiar with it and accept the standard of performance as “reliable.” But as any emergency services worker will tell you, having a radio that doesn’t send/receive when you need it to is a waste of the belt clip. Analog devices are prone to dead spots, fuzzy reception and fading signals.

This isn’t to say that digital devices are foolproof—there are known issues with modern, digital radio equipment, particularly where the rollout of digital radio devices through an urban area is under-facilitated. Having a radio that predictably works can be a huge advantage for workers in the field. The flexibility of Vertex digital radio technology is in the ability to enable your field staff to access both digital and analog bands.

The digital advantage

Digital radios are often slighted for the fact that “either they work, or they don’t” – when they work, there’s no fading signal and no crackling messages to try and decipher. You’re either getting crystal clear reception or none at all through the peaks and troughs of the city skyline. But Vertex digital radios were made for today’s world – designed to function reliably on trunked and conventional systems throughout the bustling environments rich with radio traffic in our large cities.

The consistent, clear audio has an increased battery life for reliable communication when you need it most. Many of the digital radios in the Vertex line offer amazing advances like:

  • Integrated voice and text messaging
  • Weather and shock protection
  • Power-saving transmission technology with powerful batteries for increased uptime
  • Remote lock-down features
  • Panic buttons, lone worker alerts and other safety features

In addition to increased connectivity, these are features will boost up-time, help your teams work better together and improve service availability for customers in all areas. With these state-of-the-art features and more, digital Vertex radios will keep your New York area team running at maximum efficiency into the future.

For more information about how digital radios can improve your workplace connectivity, contact the communications experts, and the prime New York Vertex dealer at PMC Associates today. We’d love to help your team find the right digital radio solution for your workplace needs.

Posted in NJ Local Service Areas, Two Way Radio Buying Guides, Vertex Standard Company Info

What You Need To Know About Portable Radio Earpieces


There are a lot of portable radio earpieces that you could explore for your business and industry needs. Your perfect portable radio earpiece would allow you to listen privately to your radio, but still let you hear what is going on around you. The tubes for would need to attack to the high output speaker and then connect correctly to clothing. Your portable radio earpiece should be discrete as well. You should be looking for something that’s comfortable, easy to use and sturdy. Most wires can fit comfortably underneath the clothes. The best wire will virtually be invisible to anyone else.

What To Buy

With so many products out there, it’s hard to know what the best on the market is. If you are looking for a vertex dealer in New Jersey, PMC Associates is your one stop shop, offering a wide range of Vertex Standard radios. They offer the EVX-530 Series Portable Radios from Vertex Standard. This piece presents the Vertex MH-37A4B RX-TX Yaesu Ear Piece that is of Light Duty superiority. The earpiece bought separately comes with a one year-limited warranty. It also plugs into the Microphone or Ear jack, has a lapel attachment on the microphone/control button, and allows for favorable operation at the same time as the transceiver is in use.

This type of earpiece is very unique—usually because it can be used on other Vertex devices including the VX-410 and VX-420.

With other models such as the VX-921 and VX-924, a VH-111 earpiece is used. This is heavy put as opposed to the light duty in the previous models— it also has a dual muff, over the head style and a boom microphone.

Where To Go

Founded in 1988 by Phil Casciano, PMC Associates is a family owned and operated Wireless Two-Way Communications integrator specializing in Mission-Critical Radio Solutions. PMC Associates has 150 years of combined industry experience working in public safety agencies, transportation, schools, and utilities.

They believe in providing revolutionary, cost-effective solutions and superior customer service. They believe these key factors help our customers accomplish their two-way communications objectives. PMC Associates exceed their customers’ expectations by providing the best solutions and enable them to complete their projects on time, and within budget. This company can also set up and install GPS tracking systems for safety fleet vehicles.

PMC Associates is currently the largest Vertex Standard two-way radio reseller in the United States. They are located in Hazlet, New Jersey, with personnel in New York, New Jersey, Pennsylvania, Delaware, and in the DC/Virginia area. All products are available by visiting a store near you or via their online platform.

Vertex Standards land mobile products are used in area that require the highest degree of reliability and functionality. Out of Holmdel, New Jersey, Vertex Standard offers a wide range of products including small communication systems, MCA, and general commercial use radios. Products from Vertex Standards can be found everywhere from construction sites, in the logistics industry, event halls, and security companies.


For a good deal on portable radio earpieces, you can check PMC Associates or call 1-877-PMC-1988 today— the vertex dealer in New Jersey.

Posted in Two Way Radio Buying Guides, Two Way Radio Products

Vehicular Repeaters: A Buying Guide

Today’s public safety communications systems are bolstered by several different technologies designed to increase the coverage, quality of audio, and level of reliability. While there are several different systems used by emergency response units, the Vehicular Repeater System (VRS) is one of the least expensive and most impactful technologies used at the scene of an emergency situation.

Vehicular repeaters are designed to extend the range of a police radio system or other emergency response unit’s radio control to that nearly of mobile technology. Practically every emergency response unit and police radio system relies on repeater technology. The following information highlights the separate parts of a repeater system.

Parts of a Vehicular Repeater System

  1. Mobile Radio
    • The mobile radio is the normal unit used in any emergency response vehicle.
  2. Vehicular Repeater
    • The vehicular repeater (VR) is a low powered version of the fixed repeater stations, which are commonly used in the infrastructure.
    • The vehicular repeater accepts a signal from a close portable radio and resends the signal on another frequency. The signal is retransmitted at power levels around 6-10 watts, in contrast to the 3-6 watts that is normally used by the portable radios.
    • The bolstered power pushes the signal in spite of the losses experienced by the antennas  that are mounted on speaker mikes. It also accounts for the losses that occur from using the radio on the base floors of buildings.
    • The vehicular repeater is designed to operate on 12 Volts DC and effectively connect to the mobile radio.
  3. Control Head
    • The control head is an altered version of the typical mobile radio control head. The control head operates the mobile radio and also controls the operations of the vehicular repeater, which includes the ID of the portable radio.

Industry Leading Vehicular Repeaters

  1. Pyramid Communications SVR-200 Vehicular Repeater
    • As the industry standard for the police radio system, the SVR-200 is a synthesized low powered repeater, which was created to interact between a low power handheld and a high power mobile radio.
    • In the event that the operator is out of the vehicle, the SVR-200 will automatically transmit the signal to the handheld unit and the user can respond from the handheld.
    • The SVR-200′s on-board logic control makes sure that no matter how many vehicles arrive on the scene, only one will become an active repeater.
    • SVR-200 Vehicular Repeater Spec. Sheet
  2. Pyramid Communications SVR-250 Vehicular Repeater
    • As the analog next generation vehicular repeater, the SVR-250 is available in UHF, 700 MHz, 800 MHz, 900 MHz, and in VHF.
    • With the fastest emergency signaling from the portable to dispatch and the fastest priority sampling time in the entire industry, this unit can have up to 20 channels.
    • Works well with SVR-200, which makes integration smooth and seamless.
    • SVR-250 Vehicular Repeater Spec. Sheet
  3. Pyramid Communications SVR-P250 Digital Vehicular Repeater
    • As a fully compliant repeater with the APCO Project 25 Phase 2 Digital Common Air Interface Protocol, the SVR-P250 is built for the next generation.
    • Being both analog and P25 capable, The SVR-P250 has the ability to interface to digital, analog, conventional, or trunking phones. This repeater also has the capabilities to interface with mobile satellite phones.
    • In analog mode, it’s compatible with SVR-200 and SVR-250 VR systems.
    • SVR-P250 Digital Vehicular Repeater Spec Sheet
  4. Vertex Standard VXR-1000 Series Repeater
    • A more cost-effective way to have dependable coverage.
    • Informs the user when the system is out of range.
    • Includes Voice Inversion Encryption that offers secure communications capabilities
    • VXR-1000 Series Repeater Spec. Sheet

To get more info on vehicular repeaters in NJ, call 1-877-PMC-1988 or check out our products on!


Posted in Two Way Radio Products, Vertex Standard Company Info

Top 5 Questions To Ask Your In-Building Radio Installer

With regulations being strict and tight on adequate radio coverage of buildings, you probably should be pondering over a few issues that escape your grasp. You have probably heard that radio coverage is a facet of building safety policy and it’s probably left you with more questions than answers. You better find an expert to fill for the answers regarding radio system site work before you find yourself on the left side of the law out of ignorance. Radio installers are all over and hopping from one building to another as they go about their job; perhaps you should seek their help. The top things that you should ask the installer include:

Significance of Coverage

Could it be that all these regulations about coverage are just there to strain you and stretch your pockets further? Or could there be any direct benefit to accrue from them? These are some of the many questions for which you should have answers. Radio communication systems have a plethora of advantages that will benefit you. Your radio installer should be able to tell you if your system is connected to those of fire stations, hospitals and police stations, just to mention but a few.

Areas of your Building

You also need to make enquiries regarding the following areas of your building:

  • Fire command centers
  • Stairwells
  • Elevators
  • High hazard areas
  • Basements
  • Parking garages
  • Ramps

Under some regulations there are also other buildings that are treated as exempt buildings. Your radio installer will explain that to you in-depth.

Amplification Systems

Sometimes, the signal strength reaching you may need enhancement in order to strike compliance with the set laws. In such instances, you need to know if you can have amplifiers installed for you and at whose expense. In some places, this burden of expense is not borne by you, whereas in other places you shall incur the expense. If you are the one to incur the expense, you need to know from your installer the required type of amplifiers since some regulations are strict on this.

Acceptance Test

Before occupancy of a building can be assumed, there are steps to be followed in a bid to get the certificate of occupancy, and these are provided as guidelines in test procedures. First, there is the acceptance test that has to be done even before you can be issued with a certificate. This test is done to ensure that the building conforms to the requirements of the law and is done in most cases by individuals acceptable to the fire chief. You could consult your installer as to who those individuals could be.

Annual Test                                                                                                                                        

For it to support the requisite level of radio coverage, it is required that the in-building radio system be tested once a year to keep track of its workability. This radio system site work is yet again done by individuals acceptable to the fire chief as is required by most regulations. Your radio installer should assist you to fetch the right person. Most components of your system, which include amplifiers, power supplies and back-up batteries, are going to be taken through the test and you need to know from your installer the exact parameters that are going to be tested for in these components. All other active components of the system shall too be subjected to checks to determine whether they’re operating within the manufacturer’s specifications. The installer will guide you through the entire radio system site work process and help you to compile a report to be submitted to the fire chief after the specified duration.

To learn more about what it takes to get your in-building installation added as soon as possible, please call (877) PMC-1988 today!

Posted in Two Way Radio Buying Guides, Two Way Radio Products, Vertex Standard Company Info

How To Set Up Your Police Radio Base Station

Police Radio Base Station NJPolice Radios have been in place for decades.  The first police radio system was put in place in the United Kingdom in 1969 by the British Police.  Having a police radio base station is crucial in the proper functioning of any police force.  Several things are necessary to set one up, including the proper equipment.  For the type of work done by police, it is important to get a high quality base station with a repeater (some trustworthy brands are Tait and Vertex Standard for base stations).  You will also need portable radios, and possibly mobile radios, vehicular repeaters, and in-building systems.

In the United States it is quite common for municipal police, county sheriffs, and state officers to take charge of their own radio systems.  While this is excellent in terms of independence and resourcefulness, it can cause problems when frequencies interfere between different branches of law enforcement.  Typically the Federal Communications Commission (FCC) will assist in assigning licenses to these branches.  This defines which frequency each is supposed to utilize.

Encrypted for Unwanted Listeners

Many police radios are encrypted to prevent any unwanted people listening to their communications.  In the case that they are not encrypted— it is generally frowned upon to listen in on those channels (in some places it is illegal).  Lately certain states have started their own radio network for just that state.  Some examples of these radio networks include: VIPER in North Carolina, ARMER in Minnesota, MPSCS (Michigan Public Safety Communications System) in Michigan, and WISCOM in Wisconsin.

Generally speaking, a base station consists of a GPS receiver, GPS antenna, base station radio, and requires a power supply.  The receiver should be placed somewhere in the station where those using the radio will be equidistant in range, and as high as possible.  The antenna may be separate from the actual base station, in which case it should be placed outside and not near buildings, towers, trees, or vehicles.


You may experience electromagnetic interference if the base station is placed too near some things— electric motors, equipment using DC-to-AC converters, televisions, computer monitors, fluorescent lights, and spark plugs.  An SPS Modular receiver may also help in the quality of performance (with the help of another antenna placed on a tower or tall building).

The base station must be plugged into a power source to function, as most do not typically run using batteries.  For optimum performance— input and output frequencies should be spaced as far apart as possible (though historically, some have functioned with only a difference of 175 kHz).


To be sure there will be clear communication from base to radio and radio to base, have the radios present and test them.  Depending on how many channels you plan on using, there should be a defined list of the proper frequencies to use.  This list could be an FCC assigned range of frequencies, or a more localized and customized list.  Be sure those using the police radios are familiar with dispatch etiquette and how the two-way radio functions.asdfgad

If you are interested in learning more about police radio base station installs from PMC Associates in New Jersey, call 1-877-PMC-1988 or contact us today!

Posted in Two Way Radio Products, Two Way Radios for Public Safety, Vertex Standard Company Info

How To Keep Two-Way Radio Communication In Busy NYC

New York City Two Way RadiosNYC is one of the busiest cities in the world, and with the crowds, concrete and chaos, getting basic technology to function can be a challenge. The best way to ensure that you don’t lose communication is to find a reliable two-way radio dealer, NY. Of course, a great dealer will be able to help you find what you are looking for, or at least be able to narrow it down for you, but it is best to go in with some ideas on what you need.

There are a number of two-way radios each with a specific environment in mind. When you are traversing snow-capped mountains as you ski, you need something with a long range and that is extremely durable. However, when you are in NYC you are after something entirely different, especially if you are an emergency responder.

  • The two-way radios should not require a lot of power to function. By having radios that operate on lower power, you will be able to get more use out of the batteries.
  • You want to have two-way radios that have dozens of channels so that you are more likely to find an open one when you need it. This will also help you maintain communication while the radios are in use.
  • Radios with keypad locks are the best for ensuring you stay on the same channel, despite how much you move.
  • To help you monitor battery life, transmission, and other necessary functions, you should have a display panel that lets you know the status of your radio. Being able to see when you need to swap out batteries is vital for knowing how long you can keep communications or if you need to warn the other party you need to switch the radio off for a few minutes.
  • Make sure that the two-way radios are able to operate over the required range. If you are not sure what that range is, it is best to over estimate than to underestimate.
  • Some radios include weather alerts, which is definitely useful in a large city like New York. With so many other elements competing to block out the sound and swallow the communication, being forewarned about possible issues can help you prepare for another possible issue.

Whether you are sightseeing at the Statue of Liberty, catching a show on Broadway, or cycling around Central Park, you want reliable communications. Finding the right two-way radio dealer in NY is not as tough as it sounds. Stop by 8 Crown Plaza, Suite 106 Hazlet, NJ 07730 to find the right two-way radios for your needs.


Want a closer look at all the great communication tools that you can put to use in the Big Apple? Check out our video slideshow here!


Posted in NY Local Service Areas, Two Way Radio Buying Guides, Two Way Radio Products, Two Way Radios for Transit Workers

How To Get Better Battery Life Out Of Your Two-Way Radios

If you own a two-way radio or you are considering purchasing a two-way radio from a dealer in NY, one of the things you may be concerned about is preserving the battery life. Depending on the make and model, batteries for electronic devices can be difficult, expensive, or even impossible to replace. In these instances, when the battery no longer functions properly, the electronic device is practically useless. But there is no need to worry, as there are many steps that you can take to protect and preserve the battery life of your two-way radio.

Initial Conditioning for Your Two-Way Radio Battery

Although most manufacturers condition the battery before allowing it to leave the warehouse, sometimes these radios may sit on the shelf in a factory or store before making their way to your house, so it’s always a good idea to do this step anyways. If the battery comes pre-charged, you will want to run the radio until the battery is completely dead.

Once the battery is dead, turn the radio off and allow the battery to completely charge undisturbed. For best results, you will want to follow this procedure for the first three full charges for your new radio.

Maintenance of Your Two-Way Radio Battery

Once you have followed the process for the initial conditioning of the battery, however, the strategy changes completely. Do not wait until the battery needs a full charge to plug it in. When you do plug it in, do not leave it charging for hours at a time. The goal is to keep it comfortably charged at all times without prolonged periods of time on the charger, which can cause the battery to overheat and therefore shorten its life.

Every two to three months, you will want to run the battery completely dead and give it a full charge, as you did when you first conditioned the battery. This will help prevent the build-up of crystals inside of the battery, which can cause permanent damage to the battery.

Ideally you should use your two-way radio regularly to keep the battery in top shape. However, if you do have to leave it unused for some time, do not leave the battery completely uncharged. A dead, unused battery is very prone to crystal growth, which can prove to be quite damaging.

Storage of Your Two-Way Radio Battery

Whenever you are not using your two-way radio, store it in a location that is cool and dry. Excessive temperatures can severely damage the battery. Moisture may corrode the battery. Your car is one of the worst places you could leave your two-way radio, as the interior of a vehicle can get very hot when it is not running, especially in the warm summer months.

With proper care and maintenance, your two-way radio and its battery should work well and serve you for a long time.

Purchasing a Two-Way Radio

If you are looking to purchase a two-way radio from a two-way radio dealer in NY, visit PMC Associates, the largest Vertex Standard two-way radio dealer and reseller in NY and the US. PMC Associates is located in Suite 106 at 8 Crown Plaza in Hazlet, NJ. To visit PMC Associates and browse the store’s collection of two-way radios, take RT-35 to Centersville. Turn onto Union Avenue, located near Osho Japanese Restaurant and Villa Pizza. Drive about half a mile before turning right onto Crown Plaza. PMC Associates will be about 0.1 miles ahead on the left, just before the end of Crown Plaza.

Check out two way radios up close with our new video slideshow!


Posted in Hazlet NJ Community Info, NJ Local Service Areas, Two Way Radio Buying Guides, Two Way Radio Products, Vertex Standard Company Info